Coil heaters are made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with mgo powder and compacted for faster and efficient heat transfer. The heaters are annealed to acquire malleability for bending into any shape. Hot runner heaters with built in thermo couple are also available. Hot runner bushes are produced with hot runner heaters of different cross section with inner brass and outer stainless steel cover.
Manifold Heaters are available in Round & Square cross sections and various sizes and shapes as per customer's specifications.The outer sheath is made of Inconel.
Providing the best range of Cast Heaters such as Cast Bronze Heaters Aluminum Casted Heater with effective and timely delivery.
Our whole range of D type heaters is known for features like optimum performance and low maintenance. These are tested on the various parameters such as working and safety before being supplied to the clients. Heaters are fabricated using pre-tested, high grade stainless steel and brass metal which are again tested before being used in the manufacturing process. Our product range is available to our clients at cost effective prices.
Thermocouples are the sensors used to receive the signal from the heating area in directly proportional to the rise of temperature. These are two dissimilar metals joints to form one junction and produce mill volt directly proportional to the rise in temperature. We manufacture J, K, R, S, N and any other type.
Alkaline heaters are made of Chrome Nickel sheathed heating element brazed to C.I. junction box for mounting on side of the vessel, easy to remove and clean. Features - * Heaters manufactured by using titanium pipe * Mounting one side of the vessel * Easy to remove and clean * Available in various Vottages and different sizes
Features - * Furnace coils mainly used in Muffle Furnace and in Melting and Holding * Rating 450 degree Celsius to 1850 degree Celsius * Available in various Gauges
Porcelain Heaters, offer a large heated area to the Gases, liquids or semi-solids to be heated when inserted into a Thermo well. A Feature of this type of heater is that it may be removed for repair or replacement without draining the contents of the vessel. The sheathing Material may be M.S, S.S or Titanium or with clamp late, depending on the application.
An infrared heater or heat lamp is a body with a higher temperature which transfers energy to a body with a lower temperature through electromagnetic radiation. Depending on the temperature of the emitting body, the wavelength of the infrared radiation ranges from 780 nm to 1 mm. The relationship between temperature and wavelength is expressed by Wien's displacement law. No contact or medium between the two bodies is needed for the energy transfer. Infrared heaters can be operated in vacuum or atmosphere.
Ceramic Band Heaters design consist of a helically wound resistance coil made from 80/20 michrome wire, evenly stretched and precisely strung through a specially designed ceramic insulating bricks forming a flexible heating mat. The ceramic heating mat along with ceramic fiber insulation is placed on a stainless steel housing made with serrated edges providing maximum flexibility for easy installation.
Mica Band and Nozzle heaters are made of Nickel Chrome resistance ribbon precisely wound on specially selected Mica sheet. It is then insulated and covered by metal sheathing and rolled to the required shape. We build every technically possible heater as per your requirement.
Features - * Made of imported fused silica tubing with re mountable heating element inside. * Used at highest temperature in all acids, ferric chlorides, etching baths, anodizing etc.
Water and Oil immersion heaters are installed in a tank or container to heat a liquid. The installation can be over-the-side, flanged or threaded. These heaters are available with heating elements made of copper, steel, stainless steel, cast iron, titanium, and PFA coated. A wide selection of kilowatt ratings, shapes and mounting methods are available to suit many different types of applications.
These heaters are made of high grade heating resistance wire element supported in Fluted Refractory, which is sheathed in rust resisting steel. End-tab holes are provided for mounting. This is basically a Heavy Duty Refractory insulated strip heater with locked on Finns for fast transfer of heat to air.
Application - * Heating Mantels mainly used in Pharmaceutical Laboratories * It also used in the Soldering Bath for the soldering purpose
A cartridge heater is a tube-shaped, heavy-duty, industrial joule heating element (electrical resistance) used in the process heating industry, usually custom manufactured to a specific watt density, based on its intended application. Highly compacted they reach a surface watt density of up to 50 W/cm². It may be used to heat any kind of substance or material, such as oil, air, or sugar. However, a common application are plastic pellets, which are melted in order to form molded plastic parts. An example of such a process is the "hot runner" process.